View unanswered posts | View active topics It is currently January 20th, 2018, 11:52 pm



Reply to topic  [ 134 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7
 New crossover minis 
Author Message
Denizen
User avatar

Joined: July 12th, 2012, 3:49 am
Posts: 360
Goblin-King wrote:
However, the cards were totally bent out of shape! ...
I worry if I can save my cards. One was bent almost 90 degrees near the bottom!
If you haven't already, send an email to info@sodapopminiatures.com and tell them about the damaged cards. As far as I know, they should be able to replace them.

(Keep in mind that it sounds like the emails are quite behind, so you'll probably have to wait quite awhile for a response.)


November 11th, 2017, 4:12 pm
Profile
Bottle Cap
User avatar

Joined: January 17th, 2017, 4:08 pm
Posts: 42
I can say 2 months estimated waiting. Still waiting on a reply from my email out of October.


November 13th, 2017, 8:58 am
Profile
Minion
User avatar

Joined: November 11th, 2015, 5:18 pm
Posts: 180
odinsgrandson wrote:
I forget that there are people who don't know about this one.

Scoring works just like it does with clay etc. You take a hobby knife and make hash marks, which increases the surface area for the super glue. It works with metal and resin minis.

If you're gluing broad surfaces together, it can work really well, but I also often use it when areas aren't convenient for pinning (like the wrists on infinity minis).

I haven't found a great deal of need for it with plastic to plastic joins, and it is less useful when you're converting things (because the ends probably don't align properly anyway).

Some people misjudge the strength of good superglue because they use a quick set spray. That stuff would never make it through the mail.


Thanks for the info, I will have to try it out.

The extra flashes on the miniatures don't bother me, and where easily fixed. The hero with the large hammer have a slight indentation on the face that does not look quite right. The base being plain is not that that big of an issue for me, but it does look somewhat disingenious to have the online store image displayed them on a sculpted base.


November 13th, 2017, 6:53 pm
Profile
Bottle Cap
User avatar

Joined: December 10th, 2015, 10:17 pm
Posts: 8
Goblin-King wrote:
rudehero wrote:
The plain bases through me for a loop as well, but aren't a huge issue for me. Overall the figures all look absolutely stunning and I'm glad I pulled the trigger on them.

Waaiiiiiit whaaaaaaaat?

Didn't notice this before right now!
God gogging gammit! Why? Why why why?
A consistent look is very important to me. It was bad enough when they changed the design of the dungeon bases. This is actually a huge deal for me :(

The TK at least has a special themed sculpted base. That's okay. She is a crossover and she carries her own distinct theme with her.
I know the schoolgirls are also crossovers, but that's no excuse for just throwing in a plain base.

I sure hope they'll release a bag'o'bases at some point.


Is there any update on this? This is an important factor for me too. It was bad enough that all the Ninja crossovers didn't have the dungeon bases... I hope this isn't the pattern from now on.


December 14th, 2017, 7:37 am
Profile
Consul
User avatar

Joined: June 20th, 2012, 8:00 pm
Posts: 2693
Location: Sønderholm, Denmark
Worship wrote:
Is there any update on this? This is an important factor for me too. It was bad enough that all the Ninja crossovers didn't have the dungeon bases... I hope this isn't the pattern from now on.

No update as such? It's just a fact that they come with plain black bases.

I wonder what kind of thought went into the decision to just include plain bases...
I mean... Sure I'm not in the miniature production business, but I imagine throwing in a dungeon base is basically free since they are already mass producing them? Seems like an odd place to cut corners.

_________________
I'm Super Dungeon Excite!
Super Dungeon Explore Compendium


December 14th, 2017, 9:30 pm
Profile WWW
Minion
User avatar

Joined: March 13th, 2012, 4:26 pm
Posts: 218
They mass produce them in china, but the resin miniatures are not made in the same place afaik


December 14th, 2017, 9:39 pm
Profile
Bottle Cap
User avatar

Joined: December 10th, 2015, 10:17 pm
Posts: 8
Goblin-King wrote:
No update as such? It's just a fact that they come with plain black bases.

I wonder what kind of thought went into the decision to just include plain bases...
I mean... Sure I'm not in the miniature production business, but I imagine throwing in a dungeon base is basically free since they are already mass producing them? Seems like an odd place to cut corners.


Yea I agree completely. Such a minor detail can throw off the entire collection (imo) I wish they would've just gave them all the same bases.

I guess by "update" I mean if there's any word from SP/ND on releasing separate dungeon bases or if there's a really good replica that the community is familiar with?


December 14th, 2017, 9:43 pm
Profile
Denizen
User avatar

Joined: May 15th, 2015, 9:39 am
Posts: 339
Location: Land of OZ
Worship wrote:
Goblin-King wrote:
No update as such? It's just a fact that they come with plain black bases.

I wonder what kind of thought went into the decision to just include plain bases...
I mean... Sure I'm not in the miniature production business, but I imagine throwing in a dungeon base is basically free since they are already mass producing them? Seems like an odd place to cut corners.


Yea I agree completely. Such a minor detail can throw off the entire collection (imo) I wish they would've just gave them all the same bases.

I guess by "update" I mean if there's any word from SP/ND on releasing separate dungeon bases or if there's a really good replica that the community is familiar with?



impact miniatures make the dungeon style bases, have done for years now, as well as a plethora of other companies...


December 16th, 2017, 11:39 pm
Profile
Bottle Cap
User avatar

Joined: December 10th, 2015, 10:17 pm
Posts: 8
Lizardman wrote:

impact miniatures make the dungeon style bases, have done for years now, as well as a plethora of other companies...


I saw the bases at Impact before, wasn't entirely sure if the style fit. I'll have to check them out again


December 19th, 2017, 2:34 am
Profile
Denizen
User avatar

Joined: May 15th, 2015, 9:39 am
Posts: 339
Location: Land of OZ
Worship wrote:
Lizardman wrote:

impact miniatures make the dungeon style bases, have done for years now, as well as a plethora of other companies...


I saw the bases at Impact before, wasn't entirely sure if the style fit. I'll have to check them out again


they fit in just fine mate, got both the small and med/large ones for custom minis and they don't look out of place at all


December 19th, 2017, 11:01 pm
Profile
Bottle Cap
User avatar

Joined: December 10th, 2015, 10:12 pm
Posts: 2
I just got my figures yesterday in the mail, and was surprised to find out that they weren't preassembled like the other figures would normally be.

Wondering if anyone could recommend me either the proper tools, materials and techniques for assembling the 3 new figures, or to just direct me to the proper SDE threads to see for myself what to do. I'm new to assembling models, and although I really want to play with these asap, I want to make sure that I assemble the new figures to be as sturdy and durable as possible.


December 24th, 2017, 5:19 am
Profile
Ninja Corps
User avatar

Joined: December 10th, 2015, 10:19 pm
Posts: 293
Greetings Darkmoonowl. I was in a similar boat, I've been very comfortable with the pre-assembled, and was a little surprised by the challenge of trimming, de-flashing and assembling. I purchased this very affordable kit along with some super glue, and the side-cutters scissors alone were worth the purchase (along with the angled tweezers!). Hopefully that helps.

https://www.amazon.com/gp/product/B01GH ... UTF8&psc=1

https://www.amazon.com/Pacer-Technology ... =zap+a+gap

*Edit - forgot one thing on technique. Recommend dipping the miniatures in mild soapy water to clean off the mold-release formula, rinsing well and allowing to dry prior to gluing, and definitely before painting. It will make sure there is no anti-sticking agent from the molds on the miniature prior to assembling.


December 24th, 2017, 5:26 am
Profile
Bottle Cap
User avatar

Joined: December 10th, 2015, 10:12 pm
Posts: 2
Meankeb wrote:
Greetings Darkmoonowl. I was in a similar boat, I've been very comfortable with the pre-assembled, and was a little surprised by the challenge of trimming, de-flashing and assembling. I purchased this very affordable kit along with some super glue, and the side-cutters scissors alone were worth the purchase (along with the angled tweezers!). Hopefully that helps.

https://www.amazon.com/gp/product/B01GH ... UTF8&psc=1

https://www.amazon.com/Pacer-Technology ... =zap+a+gap

*Edit - forgot one thing on technique. Recommend dipping the miniatures in mild soapy water to clean off the mold-release formula, rinsing well and allowing to dry prior to gluing, and definitely before painting. It will make sure there is no anti-sticking agent from the molds on the miniature prior to assembling.


Oh wow, that was a quick reply!
Thanks a bunch, I'll wait a little before fully committing to purchasing those tools, but I do think they'll be solid to work with if I do go with those.

One or two specific things I'll also ask real quick:

1. I noticed that the slots of each base was a tad bit wide, and so the parts where the models would fit into the slots wouldn't be completely snug. Should I use something to put in between the slot, or just glue it to one side of the base's slot and assume that that will make it stable enough?

2. What's the best way to both store + transport my (loose) miniatures + cards, if anyone has any recommendations for certain materials + products. I've already started looking into varieties of foam from pirate labs*, though I have no clue what sort of container I'd place the foam in for both storage + transport, and as for whether or not I should invest in something like a deckbox for Magic; the Gathering cards to store the extra cards I have.

*I saw this specific product being sold, but I assume it would only be enough room for those specific minis from that particular set. Also, I assume that the other items wouldn't fit in the box with the foam occupying it...? Wondering if it's worth purchasing if it would keep my minis in a good condition.
https://www.amazon.com/dp/B01EFR2ZO2/_e ... 9OX9&psc=1


December 24th, 2017, 5:49 am
Profile
Denizen
User avatar

Joined: May 15th, 2015, 9:39 am
Posts: 339
Location: Land of OZ
Meankeb wrote:
Greetings Darkmoonowl. I was in a similar boat, I've been very comfortable with the pre-assembled, and was a little surprised by the challenge of trimming, de-flashing and assembling. I purchased this very affordable kit along with some super glue, and the side-cutters scissors alone were worth the purchase (along with the angled tweezers!). Hopefully that helps.

https://www.amazon.com/gp/product/B01GH ... UTF8&psc=1

https://www.amazon.com/Pacer-Technology ... =zap+a+gap

*Edit - forgot one thing on technique. Recommend dipping the miniatures in mild soapy water to clean off the mold-release formula, rinsing well and allowing to dry prior to gluing, and definitely before painting. It will make sure there is no anti-sticking agent from the molds on the miniature prior to assembling.



Yeah this is all good info mate, also instead of using the dipping method to clean them (u GOTTA clean them, otherwise the glue won't stick properly nor will the paint) use an old toothbrush (soft probs better than hard, but old ones should be anywyas) and just give them a light scrub, it will clear the recesses a lot better


December 27th, 2017, 1:47 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 134 posts ]  Go to page Previous  1 ... 3, 4, 5, 6, 7

Who is online

Users browsing this forum: Bing [Bot] and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by STSoftware.